Release time: 2022-12-07

精密行星减速机在传动应用中是一款非常常见的传动部件，在使用前的注意事项以及使用后的维护保养都需要有一个正确的认识，这样才能有效的延长减速机的使用寿命，节省不必要的成本，那么精密行星减速机的保养需要注意哪些问题呢？ 1.精密行星减速机的工作场所、负载能力、传动效率和润滑油牌号应符合参数中规定的数值。 ……

Release time: 2022-11-18

行星减速器选择注意哪些要点 行星减速器通常由箱体、行星架、行星轮和太阳轮组成。我们在选择减速器时主要考虑以下几点: 精度要求高吗？ 减速器一般分为高精度和普通精度，具体用回程间隙(侧隙)的大小来表示。减速器的精度取决于减速器内齿轮的造齿精度。另外，减速机长期使用后，精度……

Release time: 2022-10-28

齿轮齿条在使用过程中会因为安装或使用不规范遇到一些问题，今天在实际应用中遇到齿轮齿条在使用过程中定位精度变差，根据现场勘察情况，作出关于齿轮齿条定位精度变差原因分析。 据介绍，当负载平台在加速减速完成后，定位精度就会出现0.4mm至0.5mm的误差，再结合现场工作环境和齿轮安装结构分析如下： 1.铝型材在……

Release time: 2022-06-27

The core component of the planetary gearbox is the planetary gear carrier, which determines the accuracy of the gearbox, but in addition, the output shaft, sealing ring, bearing and other components also play a very important role. The planetary gearbox i

Release time: 2022-06-15

将一对任意螺旋角的斜齿轮安装成其轴线既不平行又不相交，就组成了 交错 斜齿轮传动，所以交错斜齿轮传动是用来传递空间两交错轴之间运动和动力。单个齿轮就是斜齿齿轮，但由于交错轴斜齿轮传动和斜齿轮传动两轴的相对位置不同，所以传动的特点也不一样。接下来给大家介绍交错轴斜齿轮传动特点和啮合条件。 ……

Release time: 2022-06-13

During the operation of the rack and pinion, in order to reduce the friction system of the rack and pinion, it needs to be lubricated. Rack and pinion lubrication mainly has two purposes, one is to promote the sliding between the tooth surfaces, that is,

Release time: 2022-06-10

In order to increase the rigidity of the rack in the manufacturing process, there are many treatment methods, mainly through heat treatment. Heat treatment is a process of heating or cooling a metal material in order to obtain the required metal structure

Release time: 2022-06-10

Common methods for gear tooth profile dressing 1. Tooth trimming Tooth trimming is a general term for edge trimming and root trimming. Generally speaking, the method of cultivating relationship is more common. Overhauling refers to conscious

Release time: 2022-06-09

Since the teeth of the spur gear are parallel to the axis of the gear, the same is true in each plane perpendicular to the axis. However, the gear always has a certain width, so the points and lines studied on the end face actually represent the lines and

Release time: 2022-06-09

The design content of the involute spur gear transmission mainly includes selecting the transmission type, determining the main parameters, and calculating the geometric dimension check of the gear transmission. When designing a gear transmission, if the

Release time: 2022-06-09

1. Good meshing performance. In the helical gear transmission, the contact line of the gear teeth is an oblique straight line whose angle is βb, and the gear te……

Release time: 2022-06-08

Introduction to the basic parameters of the gear: Addendum circle: The circle passing through the top of all teeth of the gear is called the addendum circle. Its radius is denoted by ra, and its diameter is denoted by da. Root circle: The circle pas